Job Description

ESSENTIAL FUNCTIONS (DUTIES) OF THE JOB:

Correctly wand onto the shop floor data system for labor
Read and follow appropriate product criteria, activity instruction’s, and elements
Follow all safety precautions as spelled out in the Activity Instruction
Use of appropriate equipment/tools (Press, Pill Heater, Belt Sander, Anneal Bake Oven, Ring Press, CNC Machines, Burr Gun, Ultra Max, Hand Tools)
Form and finish cores per Activity instruction and product criteria
Load anneal bake setters per product criteria, if required
Load and unload anneal bake oven, if required
Understanding of loading and operation of CNC machines
Responsible for visual and dimensional quality of green cores (gauge cores)
Visually inspect cores for unacceptable defects per the product criteria or activity instruction
Correctly wand lot travelers and scrap after each tray and take cores to kiln truck
Fill out OEE sheets
Maintain clean work area and perform TPM per schedule
Perform pre-shift die inspection and TPM checklist.
Observe safety policies and regulations
Maintain high attendance record
Basic understanding of the use of dial calipers, micrometers and pin gauges
Understand use of the HCS ‘Help Chain”
Maintain pacing via Aussie Pace System
Perform Problem Solving with Leadership
Perform other duties as directed by Leadership

ESSENTIAL FUNCTIONS (DUTIES) OF THE JOB:

*Responsibilities for Internal Candidates

JOB RESPONSIBILITIES:

Correctly wand onto the shop floor data system for labor
Read and follow appropriate product criteria, AIs, and elements
Follow all safety precautions as spelled out in the Activity Instruction
Pre-finish Core Inspection
Visually inspect cores for unacceptable defects per the product criteria or AI such as cracks, chips, excess parting lines, negatives, crazing, and positives
Prepare tie bar machine according to AI (if applicable)
Cut tie bar (CTB) per product criteria (if applicable)
Prepare CTB machine for blending using proper equipment (if applicable)
Blend tie bar (if applicable)
Correctly perform Post-Fire CNC Operation
Check slot width with go/no go pins if required by product criteria (gauge cores) or if excessive finish is performed
Use ceramic patch material as allowed by the product criteria, to repair cracks, chips, negatives, and crazing. Remove excess patch using brush or sandpaper
Communicate with pre fire operators any current quality issues
Core fill slots with liquid wax per product criteria and other core prep work as called out on the product criteria such as adding standoffs
Correctly locate core on fixture (if applicable) – Assembly Area
Correctly wand lot travelers and scrap after each tray
Utilize Pace System (E-Aussie)
Work with Leadership on Problem Solving
Understand use of the HCS ‘Help Chain”
Maintain clean work area
Observe safety policies and regulations
Maintain high attendance record
Perform other duties as directed by Area Leadership

*Qualifications for Internal Candidates

EDUCATION:
- Minimum High School diploma or equivalent (GED)
- Ability to read and comprehend written instructions in the English language
EXPERIENCE:
- Consistent and stable work history
- Manufacturing / Factory experience preferred but not required
- Quality Assurance experience preferred but not required
PHYSICAL DEMANDS/EQUIPMENT USED:
- Ability to lift up to 20 pounds occasionally and 10 pounds consistently
SKILLS AND ABILITIES:
- Strong interpersonal skills and ability to work in a team-oriented environment
- Basic computer skills are required
- High degree of manual dexterity
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.

CRITICAL SKILLS/EXPERTISE: (FOR THIS JOB SPECIFICALLY)

Cut tie bar (CTB) per pro
High School diploma or GED equivalency
Three (3) months’ on-the-job training to fulfill introductory period
Six (6) months’ experience to be eligible for certified operator status
Ability to read and comprehend written instructions
Mental and visual attention
Perform to productivity and quality standards
Ability to work in a team-oriented environment
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.

Cell Operator Post-Fire - Multiple Shifts